Commercial & Industrial SolutionsWhole Home, Commercial and Industrial RO Commercial and Industrial RO Systems are high efficiently and performance to filter out underwater pollutant, contain bacteria, impurities, viruses and even dissolved solids. As people become increasingly aware of the benefits of purified water, the demand for equipment capable of treating both municipal and well water supplies continues to grow. As a result, Whole House and Commercial Reverse Osmosis systems are becoming widely accepted. We supply a wide variety of RO systems, one of which will fit your application and your budget. AL NOORAN has serial reverse osmosis system application in commercial and industrial, such as office drinking water and factory used filtration water. Commercial and industrial RO system focus on safe, sanitary, high efficiency and performance from a technology perspective in order to bring you the safest and convenient drinking water. You are the best choice on AL NOORAN commercial and industrial reverse osmosis system. Exceptional Performance, Superior Quality: Large Capacity Series is designed to provide high purity water under rigorous demands of continuous operation and harsh environments. 
Water Purification Systems for Small to Medium-sized Water Store or Bottling Plant AL NOORAN can provide packaged Reverse Osmosis systems with capacities ranging from 800 GPD to 30,000 GPD and up. These systems are ideal for small and medium-sized water stores or bottling operations. Wherever good water purity is required, our systems will typically output water in the 2 to 10 PPM TDS range. This assumes an input water TDS under 1000 PPM. However, we also have solutions for the high TDS waters as well water and even desalination plants to render water TDS below 150 when the TDS of source water is as high as 5000 or more.A typical Industrial or Commercial Osmosis System includes the following main components: Reverse Osmosis Unit: to produce the daily household requirements. For example, a 500 gallon-per-day system would produce purified water at the rate of about 20 gallons per hour. Since 20 gallons per hour is not enough to supply the demands of all normal household functions, a supplementary storage system is required so that ample water will be on hand when needed. Reverse Osmosis System provides safe, pure water using Reverse Osmosis Technology. It is capable of removing over 90% of total dissolved solids, +99% of all organics and +99% of all bacteria. The system is designed for commercial and industrial application. Ideal for beverage/bottle water, drinking water, food processing, automotive, cooling towers, pharmaceutical purified water, electronics production and many other applications requiring dependable, high purity water purification.Storage Tank: An atmospheric (non-pressurized) storage tank large enough to provide ample water for daily activities. The reverse osmosis unit refills the tank as water is taken from it. The water is stored at atmospheric pressure and must, therefore, be re-pressurized for use.Re-pressurization System: This system can consist simply of a pump that comes on automatically when water is needed and supplies pressurized water to the home. Ideally, however, it should include a smaller bladder or diaphragm tank that is filled to product pressure by a pump and gives a more even supply of water when the demand arises. The below diagram illustrates the three main components of a commercial or industrial reverse osmosis system, as described above. 
|  
| | In order to produce a product which meets the required water quality standards, commercial Reverse Osmosis systems must integrate various processing stages. The equipment required for these various stages can be purchased "stand-alone", or separately, if needed. More usually, and more economically, we will supply an integrated, or "turnkey" system, in which the needed stages and equipment are pre-connected and tested. Preconditioning Stage The proper preconditioning of your water is critical to the smooth and safe operation of your business. Improperly treated input water can cause serious damage to the various components of your reverse osmosis system, and would surely compromise the quality of your product water. A complete analysis of your incoming water supply is essential. This will determine what elements are present and what pre-treatment is necessary to remedy any problems. 
A typical standard preconditioning package consists of: · Multi-media filter to remove sediment and particulate matter · Water softener to eliminate excess mineral content · Carbon filter to remove any organic chemicals (chlorine, pesticides, etc.) These systems are available "stand-alone" or as part of a "turnkey" package. In some cases, additional preconditioning may be needed. For example, the presence of bacteria or iron in the incoming water would require treatment with ultraviolet light and specialized iron filters, respectively. Disinfection Stage The disinfection stage is an essential component of any drinking water processing operation. Since the water exiting the reverse osmosis system will be stored in a closed tank, it is susceptible to stagnation and biological contamination. 
To remedy this, some combination of Ultraviolet and/or Ozone disinfection is required. As in the preconditioning stage, this equipment can be purchased "stand-alone" if needed. However, some of the reverse osmosis systems we supply (see below) are optionally configurable with UV and Ozone modules. Reverse Osmosis Stage The main focus of our commercial reverse osmosis systems is the small to medium-sized water store or bottling operation. 
The typical water store requirement will be in the 800-3000 gallon per day range. Bottling operations will generally require 1500-12,000 GPD capacity and higher.  
MS Series 4000-110,000 GPD 
The MS Series reverse osmosis systems are designed to provide high purity water under rigorous demands of continuous operation and harsh environments. These are premium quality systems engineered to be the best the industry can offer. The MS Series systems include an array of standard features making them suitable for most commercial and industrial applications. They are also available with optional operational and control features and ancillary equipment giving you the capability to completely customize your system. Whatever your high purity water application is, the MS Series can be your solution. NOTE Production output for the MS Series systems is based on 77ºF water temperature, ph of 8.0, 1000mg/L of TDS. TDS levels over 1000 ppm or temperatures below 77ºF will reduce the rated production capacity. MS Series systems are rated for production output based on third year of operation. For higher flow rate applications, ancillary equipment or complete systems including pre and post treatment, please call us for a comprehensive system proposal. Sample Price list | No. | Product | Model | Price $ | Picture | | 1' | 1000 GPD, Industrial RO Capacity: 800GPD-1000GPD, 133 L/H
Pressure: 150~200psi
Booster pump: 0.375kW (1HP) procon 1504
R.O filter: T.F.C 4021x1
R.O material: 304 stainless steels
Flow meter: water (pure)/Flow out
Pressure gauge: in/out pressure
T.D.S indicator: LCD
Computer control: micro computer control panel
Cub: 800mmx350mmx1060mm
W: 47kg(±5kg)
Power: 110VAC/220 VAC | IRO-1000 | $1,312.50 | 
| | 1" | 2000 GPD, Industrial RO Capacity: 1500GPD-2200 GPD, 250L/H
Pressure: 150~200psi
Booster pump: 0.75kW (1HP) procon 2507
R.O filter: T.F.C
R.O material: 304 stainless steels
Flow meter: water (pure)/Flow out
Pressure gauge: in/out pressure
T.D.S indicator: LCD
Computer control: micro computer protect control panel
Cub: 800mmx340mmx1500mm
W: 62kg(±5kg)
Power: 110VAC/220 VAC | IRO-2000 | $1,725.00 | 
| | 1"' | 3000 GPD, Industrial RO Capacity: 3000-4000GPD 500L/H
Pressure: 150~200psi
Booster pump: 2.2kW (3HP)
R.O filter: T.F.C
R.O material: 304 stainless steels
Flow meter: water (pure) /Flow out
Pressure gauge: in/out pressure
T.D.S indicator: LCD
Computer control: micro computer protect control panel
Cub: 850 mmx320mmx1570mm
W:105kg(±5kg)
Power: 110VAC/220 VAC | IRO-3000 | $2,925.00 |  |
| Model No. | Capacity | Membrane | Dimensions | Inlet | Motor | Price | Price | | (Minimum) | Quantity | LxWxH (in) | Pipe | | MS4V | 4000 GPD | 4x40 | 36 x 19 x 71 | 3/4" | 2 HP | $10,125.00 | $13,500.00 | | -3 | | MS5V | 5500 GPD | 4x40 | 36 x 19 x 71 | 3/4" | 2 HP | $10,950.00 | $14,600.00 | | -4 | | MS7V | 7000 GPD | 4x40 | 36 x 19 x 71 | 3/4" | 3 HP | $12,168.75 | $16,225.00 | | -5 | | MS10V | 10000 GPD | 4x40 | 36 x 25 x 71 | 1" | 3 HP | $14,212.50 | $18,950.00 | | -7 | | MS15V | 15000 GPD | 4x40 | 36 x 25 x 71 | 1.25" | 3 HP | $17,737.50 | $23,650.00 | | -11 | | MS22V | 22000 GPD | 8x40 | 41 x 32 x 73 | 1.25" | 5 HP | $24,648.75 | $32,865.00 | | -3 | | MS30 | 30000 GPD | 8x40 | 122 x 38 x 67 | 1.5" | 5 HP | $28,575.00 | $38,100.00 | | -4 | | MS45 | 45000 GPD | 8x40 | 162 x 38 x 67 | 2" | 7.5 HP | $34,117.50 | $45,490.00 | | -6 | | MS60 | 60000 GPD | 8x40 | 202 x 38 x 67 | 2" | 7.5 HP | $36,442.50 | $48,590.00 | | -8 | | MS90 | 90000 GPD | 8x40 | 202 x 38 x 67 | 2.5" | 15 HP | $49,068.75 | $65,425.00 | | -12 | | MS110 | 110000 GPD | 8x40 | 242 x 38 x 67 | 3" | 15 HP | $56,100.00 | $74,800.00 | | -15 |
| |  |  | 110,000 GALLON PER DAY RO SYSTEMS |  |  | 130,000 GALLON PER DAY RO SYSTEMS |  |  | SAMPLES OF WATER TREATMENT SYSTEMS INSTALLATIONS |
| | | | |
|
